If you are running Windows 7 or 10, you can add a network printer from the following list:

1. Location	Queue Name(s)	Printer Type	Output Type	IP Address
   Room 235 (hall)	hp277-235area	black-white	single-sided / duplex	150.135.108.119
   Room 542 (hall)	hp4300-542hall	black-white	single-sided / duplex	150.135.109.237
   Room 351A	hp3525-351a	color	single-sided / duplex	150.135.108.169
   Room 444 (hall)	hp277-444	black-white	single-sided / duplex	150.135.108.102

   To print duplex from a Windows PC or a Mac, use the Print/Print Setup/Print Preview GUI to select double-sided printing. To print duplex from a Solaris machine, use the appropriate -dup queue.

2. Login on your Windows PC as administrator or a user in the administrator group.

3. Add the printer using HP JetDirect, which comes pre-installed with Windows 10.

   Click Settings -> Printers -> Add Printer.
   Click Next.
   Click Local printer.
   (Yes, you click "local" to add a network printer using HP JetDirect.)
   
   Unclick "look for plug-n-play device".
   (This is a rough paraphrase.)
   Click Create a new port.
   Click Standard TCP/IP port.
   Click Next.
   
   Type the printer name in first field.
   (For hp4300-351a enter the printer's IP address instead.)
   
   The second field will fill in automatically.
   
   Click Next and wait a moment for the driver selection screen to come up.
   
   Select the printer manufacturer (e.g., HP).
   Select the printer model, or the closest matching entry.
   
   Windows will find and load the correct printer driver, which is usually already on the c:/ drive.
   
   Click Next.
   Click No.
   Click Do not share.
   Click Yes.
   Click Finish.
   Click OK.

1. If you do not have a pin to the copier, please go to the LPL Konica Request Form and request a pin.
2. Download the Windows driver from: LPL Computing Resources.
3. Click on the zip file to unzip it, if needed.
4. Double click on the installer: Setup64
5. Click "Yes" or enter the administrator password when the "Do you want to allow this app to make changes to your device?" pops up.
6. Check the box to accept the Software End User License Agreement, verify that “Install printers / MFPs” is selected, then click Next
7. The installer will automatically search the network for the printer. If it is found click Next, but most likely this will not be the case. Click OK to dismiss the notification, then click on "Specify manually." and under Network select "IPv4, IPV6 Address/IP Hostname:". Enter “150.135.111.17” on the input field. Click "Next".
   
   
   
   
   
   
8. The installer will find the printer, then display the Installation Summary. Review the settings (note that the model number displays differently than the actual printer model, c650 vs c450, but this is expected), then click Install
   
   
   
   
   
9. Once the installation completes, click on the Property button

10. Click Preferences… 
    
    
    
    
    
    
11. Click on the Basic Tab. 
    
    
    
12. Change the "Output Method" to "Secure Print".  The User Settings dialog box may automatically pop up, or if it does not click on User Settings. Enter any short string you would like in the "Document ID" and/or "Password" field(s). Remember what you enter into these fields as you will later need to use them when retrieving documents from the copier. Many users choose to use their username and/or PIN from the copier in these fields but it is not required. Click OK when you are finished.
    
    
    
    
13. Click on Authentication/Account Track and enter your pin number/account code (contact Business Office to get one) on the 'Password' field. Click on 'Verify' if you want to verify that your pin is correct. Then click 'OK'.
    
    
    
    
14. When back to the 'Basic' tab, click 'Apply', then 'OK'
    
    Congratulations !!! The printer has been installed.

1. Find the name and/or ip address of the non-Konica printer you wish to add from the following list.

   Location	Queue Name(s)	Printer Type	Output Type	IP Address
   Room 235 (hall)	hp277-235area	black-white	single-sided / duplex	150.135.108.119
   Room 542 (hall)	hp4300-542hall	black-white	single-sided / duplex	150.135.109.237
   Room 351A	hp3525-351a	color	single-sided / duplex	150.135.108.169
   Room 444 (hall)	hp277-444	black-white	single-sided / duplex	150.135.108.102

   To print duplex from a Windows PC or a Mac, use the Print/Print Setup/Print Preview GUI to select double-sided printing. To print duplex from a Solaris machine, use the appropriate -dup queue.

2. Add the printer to your Mac as follows:

Open the Print & Fax application from System Preferences.

Press the + button to add a printer.

From the top of the window, press the IP button.

Enter the following (this is an example for adding hp3525-351a):
Protocol: HP Jetdirect - Socket
Address:  hp3525-351a.lpl.arizona.edu 

At this point, the application should be able to connect to the printer and fill out  the Print Using option.  

If you want to change the Name field, you can put any text in the field.

Press the Add button.

You may want to modify the default settings to enable options like duplex mode.

1. If you do not have a pin to the copier, please go to the LPL Konica Request Form and request a pin.
2. Download the driver - New Konica-Minolta C450i in 351a - Driver for Mac - you will need to login with your NetID+.
3. Click on the zip file to unzip it, if needed.
4. Go into the Driver folder, click OS_10_14_x, then A4. Double click on the installer C750i_C287i_C4050i_C751i_C4051i.pkg.
5. Follow directions. You should be prompted for your Mac's local admin password (probably the password for your account if you are an administrator on your machine). The drivers for the copier have been installed.
6. Go to System Preferences → Printers and Scanners
7. Click on 'Add Printr, Scanner, or Fax' to add a printer. Click on the IP tab at the top. Enter on the Address field:  mcopier351a.lpl.arizona.edu
8. For "Protocol", use "HP Jetdirect - Socket"
9. On the last entry 'Use:', Click on 'Select Software' and choose 'Konica Minolta C450i PS' from the list. Click OK. Click Add on the bottom right.
10. On the next screen,On Security Document Setting, click on 'Do Not Release Secure Print'.  Enable 'Secure Print Only'.  Click OK.
11. The printer should now be installed.
     
12. Pretend to print a file from word or from a browser to configure it.
13. You will see a window like this:
    
14. Click on 'Printer Options' and Click on Output Method.
15.  
16. Click on 'Account Track'
17. Leave the 'Department Name' field in blank.
18. On the 'Password' field enter the Pin number you received from the Business Office. Click on 'Save Settings'. Click Ok.
19. You should see the window like this:
    
20. Press print and you will see:
    
21. On the 'Dcocument ID:', enter a string that you will remember - this is NOT your copier password.   It is case sensitive. So when you want to release your job at the printer, you will need to remember this string.
22. Leave the 'Password:' field blank if you want.
23. Click Ok and you will see that your job has been sent to the copier.

To retrieve your job:

1. Go to room 351a.
2. On the printer click on the keyboard symbol and then type your Pin. Click Ok.
3. Click on Login.
4. Choose the Secure Print option.
5. When prompted enter the same string as you typed (case sensitive) in step 18 above.
6. Once your job is displayed, click on it  and then press the 'Print' button on the right. The Start button will turn Blue.
7. Click on Start button. Your job has been printed.
8. Be sure to sign out of the printer before you walk away.

If you are running Redhat Linux, you can add a network printers as follows:

1. Find the IP address of the non-Konica printer that you wish to add from the following list.

   Location	Queue Name(s)	Printer Type	Output Type	IP Address
   Room 235 (hall)	hp277-235area	black-white	single-sided / duplex	150.135.108.119
   Room 542 (hall)	hp4300-542hall	black-white	single-sided / duplex	150.135.109.237
   Room 351A	hp3525-351a	color	single-sided / duplex	150.135.108.169
   Room 444 (hall)	hp277-444	color	single-sided / duplex	150.135.108.102

   To print duplex from a Windows PC or a Mac, use the Print/Print Setup/Print Preview GUI to select double-sided printing. To print duplex from a Solaris machine, use the appropriate -dup queue.

2. Login as root.

3. Add the printer.

   To add an LPL printer to a Redhat linux machine:

    

   If using the gnome GUI:

   Click foot->programs->system->printer configuration.

   If using kde:

    

   Regardless of GUI type, proceed with:

   Click New.

   Click Next.

   Click the radio button next to JetDirect Printer JETDIRECT.

   Enter the name of the printer in Queue Name window.

   Click Next.

   Enter the printer's IP address in the Printer IP window.

   Click Next.

   Click Postscript Printer (top of list).

   Click Next.

   Click Finish.

   Click Apply.

   Click the row for the new printer in the list of printers.

   Click Test->US Letter Postscript Testpage.

    

   To add a PIRL printer to a Redhat linux machine:

    

   If using the gnome GUI:

   Click Foot_or_Redhat->Programs->System->Printer Configuration.

   If using KDE:

   Click K->System->Printer Configuration.

    

   Regardless of GUI type, proceed with:

   Click New.

   Click Next.

   Click radio button next to Unix Printer LPD.

   enter name of printer in Queue Name window.

   Click Next.

   type pirlprinters in Server window.

   type name of printer in Queue window.

   Click Next.

   Click Postscript Printer (top of list).

   Click Next.

   Click Finish.

   Click Apply.

   Click the row for the new printer in the list of printers.

   Click Test->US Letter Postscript Testpage.

Printing from a USB flash drive

*USB flash drive must be formatted in FAT32*

**Only PDF, JPEG, TIFF format files can be printed out**

1. Login

2. Insert a USB memory device into the USB port (close to the front panel) of the machine.

Notice: Do not insert the USB memory device into the USB port close to the rear panel of this machine.

3. Wait 30 seconds
4. Tap [Print a document from External Memory.].

• You can also print files by selecting the User Box operation mode and by tapping [System] – [External Memory].
• If the document does not show up, please make sure your usb is formatted as FAT32 (or any FAT type).

5. Select a file to print, then tap [Print].

• You can directly enter the path to the file folder in the [File Path] field.

• Tap the [Top] key to move upward.

• Tap the [Open] key to open the folder and move downward.

• Tap [Details] to display and check the detailed file information.

6. Set print options if necessary.

7. Press the Start key.

8. When printing is complete, remove the USB memory device from the port of this machine.